Uchebnik anglijskogo yazika 10 klass starkov ostrovskij perevod. A guide on using FlashWizard Pro to flash, install, repair, modify the firmware on a Dreambox receiver. Dreambox Image Install With Flash. Exit Flashwizard and pull the power from you dreambox and wait for 30 seconds before reapplying power.

Flashing a new firmware by Browser What you need to flash You need the image file you want to flash. Image files have the extension *.nfi. You can't flash other images like *.img files. Don't try it - it won't work. You need either a DHCP server and a configured bootloader You need a browser and a network cable. Connect your Dreambox to a switch/hub/router in your lokal LAN. To flash a new image, you can use the second stage loader.

It must be present and not broken. The following steps assume you have a DHCP server. If you don't have one, you have to (klick) in the bootloader's serial setup.

- Power down the Dreambox, either using 'shutdown' and by switching off by the power switch. Standby is not enough! - (1.) Press and hold the power button.

- (2.) Switch on your Dreambox. - (3.) Your Dreambox will get the next free DHCP IP address from your router.

- Now, open a browser on your PC. (1.) enter in the address line '.

- (2.) on the bottom of the page, there's a link called 'firmware upgrade'. - On the next page, you can select the flash image you want to flash. Be sure that it has the '.nfi' extension. You can't flash other images (like.img)!

- Click on 'FLASH!' It might take some time to upload and flash the image. - Switch the box off again, and on again. The new image should be flashed and working.